Shoot the Bear credit unit motor gear

The second gear in the Seeburg Credit Unit gear train is made out of phenolic or fiber. It is done to reduce the noise of the gear at the fast turning part of the reduction gear. Unfortunately as the lubrication hardens, the strain on the gear increases to the point where the gears strip.

I will be happy to take a gear even if it is stripped as well. I can pieces the gear teeth together in segments.

Rest of the Credit Unit and Motor

This is the front of the motor with the arrow pointing to the needed gear

This is the back side of the motor, showing the contacts that indicate the coin deposited and the number of plays left

This is the gun stand board credit unit board for the Shoot the Bear. The motor is in the left center of the picture.

---

---